<<<  Return to the BodyMod.org Community
  Active TopicsActive Topics  CalendarCalendar  Search The ForumSearch  
Piercings
 BodyMod.org Forum : Body Mods : Piercings
Message Icon Event: Microdermal Question - Event Date: April/16/2012 Post Reply Post New Topic
Author Message
skyxxxxxxxxxx
Mod-let
Mod-let


Total Mods: 0

Joined: April/16/2012
Posts: 1
Quote skyxxxxxxxxxx Replybullet Calendar Event: Microdermal Question
    Posted: April/16/2012 at 4:30am


Alright. On friday, I woke up and saw that one of the tops on my dermals on my hip was gone. I went to a piercer, they tried to screw another top into the base, but couldn't. Then, they used the tool to place the dermal in 6mm deep into my skin and finally found it, but it wouldnt stay screwed in, which made them think it was stripped. They used 4 extenders and about 30 minutes later i made sure everything was ok, but the extenders came right out. They said I could either go get it surgically removed, or I could leave it in there... Might not be the brightest question in the world, but... Would it hurt to leave it in? I'm just afraid of an internal infection.

Please, heeeeeelp me haha I'm a little worried.

Edited by skyxxxxxxxxxx - April/16/2012 at 4:31am
IP IP Logged
mskirby420
Mod-let
Mod-let


Total Mods: 6

Joined: April/02/2012
Posts: 36
Quote mskirby420 Replybullet Posted: April/16/2012 at 12:56pm
First let me say I am no pro but it sounds to me like you need to find a new piercer. Your piercer should know how to remove them with the tool he used to insert them. I would not advise leaving them in without a top because your skin can grow over them. If its stripped the best thing you can do is go to a good piercer and get it taken out, let it heal and get it re done. Im sure someone else here will have better advice but thats just what I think. Good luck with it all. 
IP IP Logged
BigMikeHOOKED
BMod Pro
BMod Pro


Total Mods: 30

Joined: July/05/2010
Posts: 630
Quote BigMikeHOOKED Replybullet Posted: April/16/2012 at 3:03pm
Actually, If the threads are in fact stripped, It can be difficult if not impossible to get ahold of the dermal anchor base for removal. The tool used for inserting these grabs onto the anchor top (in most cases) and without the top, using the same tool used for insertion is not gonna work. The other option is using a threaded taper to screw into the base, but if it's stripped that wont work either.

At this point I would say that going to see another QUALIFIED piercer to try it would be your best bet. As far as what would happen if you just let it stay there, Id ask a doctor, or someone else might have a better answer than I do. I DO know someone from my area that has a dermal anchor base that she lost under her skin and as far as I know has had no issues, but that really means nothing.
"stay true to your obsessions" V. Vale
IP IP Logged
erinarney
BMod Pro
BMod Pro


Total Mods: 37

Joined: April/07/2011
Posts: 148
Quote erinarney Replybullet Posted: April/27/2012 at 4:32am
You need a new piercer. It's a bitch to get them out when they're stripped, but it's possible to do without a doctor. I wouldn't leave the anchor in, that's just bad practice. In my opinion if the piercer doesn't have the skill and knowledge to remove your anchor, they should have never been installing them in the first place.
rdhdedstpchld
IP IP Logged
DisturbingNoise
Mod-let
Mod-let


Total Mods: 5

Joined: December/10/2011
Posts: 82
Quote DisturbingNoise Replybullet Posted: April/29/2012 at 3:13am
You might be able to use a dye to rethread it but I'm not to sure about that. I don't know how that would work with out taking it out. I did know someone that left one in and it just grew over and was left with a small bump but never had any problems with it.
IP IP Logged
Post Reply Post New Topic
Printable version Printable version

Forum Jump
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum



This page was generated in 0.215 seconds.